top of page

Groupe familial

Public·1 membre

Where Can I Buy A Turntable Belt

A belt-drive turntable is an engineering work of art, an instrument of music and a musical treasure. It provides listening pleasure that has yet to be fully realized by digital technology. Why? Because music cannot be bound and encapsulated by a series of ones and zeroes. Listen, compare with an open mind and you will believe.The Right Belt Difference by LP GearWith limited availability of belts, it is very tempting for turntable owners to accept whatever off-the-shelf belt is offered. Sometimes it works, often times not exactly. Our 27+ years of experience and knowledge of belts is truly unique in the industry and our supply is extensive. As a full-line turntable belt specialist, we can supply replacements for ALMOST ANY BRAND AND MODEL turntable. Since 1995, we have been serving the record-playing communities around the world via the Internet. It is our commitment to be the world's last turntable belt supplier. Through the years, we have satisfied customers in North America and in many parts of Asia, Australia, and the European Community.

where can i buy a turntable belt

Download File:

Free Belt Matching ServiceFor your convenience, LP Gear offers a free belt matching service. If your turntable is not listed, all you need to do is send us via e-mail your existing belt's type (flat, round or square), measurements specifically its length and width, and present working condition (e.g., stretched but still working or no longer working).

If you have the turntable belt:- State the type of belt used (Flat, Square, Round).- Pinch both ends of the belt.- Measure its length.- Multiply the length by two (2x).- If the turntable uses a Flat belt, measure its width (usually 0.187").- If the turntable uses a Round or Square belt, measure its thickness.- Please include the make and model of the turntable with the belt's measurements.If you do NOT have the turntable belt or it is shredded:- State the type of belt that the turntable uses (Flat, Round or Square).- Use a piece of string to tightly follow the belt's path.- Measure the length of the string.- Measure the width between the rims of the motor pulley that the belt can pass through (usually 0.250 inch).- Please include the make and model of the turntable with the belt's measurements.

Belt Installation GuidePlease click on the link below for a video on how to replace a turntable belt. This video shows the replacement process on a generic turntable but the process will be similar for almost all belt-driven turntables.

BASIC INSTALLATION NOTE: Most belts are easily replaceable. It involves removing the turntable platter (usually metal and they usually just pull straight up off of the spindle). The belt is placed around the inner ring of the platter. The platter is replaced onto spindle and then, through one of the holes in the platter, reach your fingers in, grab the belt from the inner cylinder of the platter, stretch the belt around the capstan, motor shaft or motor pulley. You are done. Some turntables are a little more involved, but most are simple. Check yours out!

At your service for 28 years, LP Gear is a global analog resource specializing in turntable stylus replacements, phono cartridges, belts, needles, headphones, audio electronics and accessories. We offer the most extensive universe of high quality replacement styli and turntable belts on the planet! You'll be startled by the improvement when upgrading a stylus, cartridge or system component.

They come in various lengths to suit a wide variety of turntables, particularly all the Japanese brands popular in the 70s like Akai, Aiwa, Apan, CDC, Denon, Hitachi, Kenwood, JVC, Luxman, Marantz, Onkyo, Panasonic, Pioneer, Technics, Sanyo, Sansui, Sharp, Toshiba, Yamaha etc.

To work out what size you require you will need to measure the diameter of the subplatter. The subplatter is the cylindrical section on the underside of the platter that the belt goes around. On some turntables it is a separate item and the platter lifts off it. With many turntables it is like this photo where there is a raised cylinder on the underside of the platter. You'll need to lift the platter off and turn it over. To select the correct size belt measure the diameter (the distance across not around) the subplatter. This will usually be in the range 140mm to 210mm. Then choose the belt size just below the measurement. eg if the diameter is 198mm, choose a 195 belt.

If your record player turns on but won't spin, you likely have an issue with your belt. A record player belt connects the motor to you turntable, spinning it at a constant pace. While they rarely snap, they can wear down and slip off. Luckily, the replacement is easy, and you can do it at home with minimal tools or effort.

4. Use a record weight with caution: If you use a record weight, be sure to place it on the spindle gently after the turntable is up to speed. Using a record weight with heavy LPs can put additional strain on the belt and cause it to wear out faster.5. Clean the surfaces that the belt rides on: If you notice that your belt is slipping or not changing speeds properly, try cleaning all of the surfaces that the belt rides on with isopropyl alcohol on a paper towel.

If the day comes when you turn on your record player, but nothing takes place, you may need to check your turntable belt. Fortunately, all is not lost as turntable belt replacement is fairly easy. To keep the tunes spinning and your record player intact, here are the signs you might need a new turntable belt, and how to replace it.

An unmoving record usually points to problems with the drive belt, although if your turntable is working, albeit slowly, it could be the cause of other factors. You may want to first follow the steps for how to fix a slow record player.

It could be that your record player may need a good wipe down. Dust, dirt, and other grime may be blocking the grooves or spindle of your record player. Once you take a look, and the belt is in good condition but seems loose, you can try boiling your belt or using talc on the motor pulley. Boiling a loose vinyl record belt for a few minutes can help shrink it back down closer to its original size.

When starting the process of your turntable belt replacement, unplug your record player from the outlet to prevent electrical shocks. Remove the plastic mat the record sits on, pulling straight up from the center and set aside on a clean surface.

The more you use your record player, the quicker the belt will wear out, though most last for several years before becoming loose or becoming altogether inoperable. Most turntable replacement belts cost under $20, an inexpensive fix. Before you think your record player is done for good, see if replacing the turntable belt makes a difference.

It has a three-speed turntable, built-in Bluetooth, as well as recording software, a built-in CD player, stereo speakers, and AM/FM radio. In short, it has it all. This throwback beauty is equipped with everything you need to amplify your listening experience.

At the end of the day, your preferences matter. If you want high-quality sound, consistent playback and a classic design, consider picking up a belt drive record player. If, however, you value durability, long-term play options and ease of use, consider the direct drive turntable.

For most, a belt-driven record player offers a much-sought-after sound quality. If you want to make a decision by playback alone, go with the belt-driven option. Examine your options fully, however, and make sure your budget, long-term needs and living situation supports this choice.

RT85 Reference High Fidelity Vinyl TurntableFeaturing a High Density Acrylic Platter and Ortofon 2M Blue Stylus, the RT85 Reference turntable delivers a warm, uncompressed listening experience that commands your attention, allowing you to get lost in the music.

If you're on this page then you are obviously looking for a quality replacement Turntable Belt at the right price. Then you've come to the right place because Audio Trends stock all the popular Turntable Belts and sizes for all the popular brands of turntable / record players and have both generic and original products as well as high quality Made In Japan items. Not sure what you need, then watch our video or give us a call. Our family has been helping customers with their Turntable needs since 1963.

The motors used in direct drive turntables are functionally like the motors in belt drives. However, they tend to be more sensitive to resistance and can start and stop faster, with little to no lag time in going from zero to full speed.

When you look at a good direct drive you will notice it is sleeker and has more bells and whistles. The user is going to be interacting with the turntable much more, manipulating the speed, and even direction, of the platter.

To the average person who just wants to buy a record player, either a belt or a direct drive will work fine and get the job done. For a beginner, the deciding factor in what kind to get will most likely have nothing to do with whether it is a belt or direct drive, but instead will be the price.

Either kind of turntable will play records at various speeds, and allow you to change records easily, or make small adjustments to the tonearm and the other components. Functionally, there is not much difference in these two formats of turntables.

If you are new the world of record players, you should probably start off with a simple belt drive model. In general, you can get a better belt drive for less money than a good direct drive will cost you.

This does not consider setting up a new turntable. This is something that takes some practice, and it will take you some time to get it right. Read the manual and follow the instructions. It does not matter if you get a direct drive or a belt drive, there is some set up involved.

As mentioned earlier, there are those who will argue there is no difference in sound between the two. However, this is also measurable and unless you are getting an expensive direct drive, belt drives are quieter. 041b061a72

À propos

Bienvenue sur le groupe ! Vous pouvez entrer en contact avec...
Page de groupe: Groups_SingleGroup
bottom of page